on standard domestic orders
This tutorial explains how to dye any fibre material (yarn, fibre, thread, fabric, etc) with natural dyes.
Use big pots with plenty of room for the material to move freely. Otherwise the colour will dye very unevenly.
Since these recipes use only alum and iron for mordants, and completely non-toxic dyestuffs, any type of pot is okay to use. If you work just with alum and iron, most dye work can be done in plastic buckets with the cold soak method below (except the dye extraction itself). Stainless steel or unchipped enamel are recommended. Aluminum pots will take more scrubbing to clean, and may stain permanently with dark dyes. Iron darkens colours, so iron pots should be used only with recipes that call for iron. Just make sure you scrub your pot thoughly after use or you may end up with pink spaghetti. If other mordants are used, use a stainless steel pot dedicated only to dyework because there will always be residue and you wouldn't want to eat from these pots.
Step 1: Preparing material and dye
Mordanting your fibre material:
ALTERNATIVE: begin with hot tap water. "MORDANT" in a plastic bucket and let it soak 3 to 5 days. (Lower temperature = more time). Silk is ready after soaking overnight. Tin, chrome and copper need to be heated to mordant well. Iron can be done cold.
MEANWHILE, extract the dye:
Step 2: Dyeing
IRON "AFTER-MORDANT" TO MODIFY colours:
Dissolve about 1 tablespoon of ferrous sulphate per pound textile. Add to the dyebath, or fill a bucket with warm water, add the iron and transfer the textile to this "after mordant" bath.
This is an important technique to know, for iron will turn golds to moss greens, reds to plum and maroon colours, and will darken browns. Many leaves and plants will make grey with iron as the only mordant needed.
Always remember: have fun and treasure the unique.
For more detailed instruction and recipes for colors, please purchase the book Brilliant Colours with Natural Dyes.